1964 Impala Front Bumper Bracket Set, Left Side, 3 pc

If you have body to bumper alignment problems, you will likely need to replace these brackets. These are the brackets that fix the font bumper to the frame on your 64 Impala.

1962-64 Impala Bumper Bracket, Front Left

This bracket connects the front left end of the 64 Impala front bumper to the frame.

1964 Impala Front Bumper Bracket Set, Right Side, 3pc

If you have body to bumper alignment problems, you will likely need to replace these brackets. These are the brackets that fix the font bumper to the frame on your 64 Impala.

1962-64 Impala Bumper Bracket, Front Right

This bracket connects the front right end of the 64 Impala front bumper to the frame.

1964 Impala Bumper Brace, Front, Center

This part supports the center bumper section as well as the filler panel below the hood latch.

1964 Impala Front Bumper Reinforcement Bar

This is the long bar behind the front bumper that all the brackets bolt to.

1959 to 1964 Impala Tie Rod Adjusting Sleeve

If your existing tie rod adjusting sleeve is rusty and pitted, replace it with a new one and you'll be proud of the underside of your 64 Impala. Fits 59-64 Impala

1958 to 1964 Impala Biscayne Bel Air Inner Tie Rod End

These reproduction tie rod ends will replace your worn out or missing originals, and comes with hardware ready for immediate installation. They will fit right into the center link and transfer motion through the outer tie rod to the steering knuckle. For use on original style suspensions, with original or reproduction components. Fits 58-64 Bel Air, 58-64 Biscayne, 59-64 Impala

Energy Suspension 33108G Bushings - Black Front End Control Arm Bushing Set fits 59-64 Impala

FRONT END CONTROL ARM BUSHING SET, BLACK -- 8 Bushings, Made Of Hyper Flex Performance Polyurethane, True Performance For Race Vehicles Yet Perfect For Street Use, Improved Performance, Greater Durability, Factory Appearance, Resistant To Normal Chemicals Such As Oil, Coolant, And Road Contaminants, Firmer Mounting, Maintains Proper Component Alignment.

1959 to 1964 Impala Anti Sway Stabilizer Bar End links

Energy Suspension 9.8119G Black Performance Polyurethane Anti Sway Bar Link Set. Yes, the picture is incorrect.

1964 Impala Stabilizer Bar Bushings

Fits 1960 thru 1969 Impala, as well as many other models of various years. Use the stabilizer bar bushing where the stabilizer bar attaches to the underside of the frame.

Energy Suspension 33108G Bushings - Front End Control Arm Bushing Setfits 55-64 Belair, Biscayne, Caprice, El Camino (thru 63), Impala, and Station Wagon

FRONT END CONTROL ARM BUSHING SET, BLACK -- 8 Bushings, Made Of Hyper Flex Performance Polyurethane, True Performance For Race Vehicles Yet Perfect For Street Use, Improved Performance, Greater Durability, Factory Appearance, Resistant To Normal Chemicals Such As Oil, Coolant, And Road Contaminants, Firmer Mounting, Maintains Proper Component Alignment. Must re-use existing outer bushing shell.

1959 to 1964 Impala Lower Control Arm Bushing

Though they look similar, the lower control arm bushing is 1 3/4" wide, the trailing arm bushing is 2" wide.

1960 to 1964 Impala Body bushing kit

• 8 small
• 8 large
• Fits 60-64 Chevy Impala Hardtop.

1961 to 1964 Impala Body Bushing Hardware

Bolts and washers used to bolt the body to the frame.

1963 to 1964 Impala 6 Cylinder Engine Mount on frame

These engine mounts are the standoffs that bolt to the frame for 6 cylinder applications.

1961 to 1964 Impala Transmission Crossmember

Brand new and ready for paint!

1959 to 1964 Impala Trailing Arm Bushing, lower front

New trailing arm bushings would really help smooth out your ride.

1964 Impala Rear Bumper Bracket Set, Left Side 2pc

This bracket set is used to mount the left side of the 64 Impala rear bumper to the frame.

1964 Impala Rear Bumper Bracket Set, Right Side 2pc

This bracket set is used to mount the right side of the 64 Impala rear bumper to the frame.