Chevy restoration parts for 64 Impala trim and molding

Parts near the front of the car start at the top of the page. Parts near the rear of the car will be nearest the bottom of the page.

Click on the picture to be taken to the Amazon.com info page

Parts Home - Accessories - Body Panels - Doors - Drive train - Electrical - Frame - Fuel System - Interior - Lighting - Trim - Weatherstripping - Windows

Use these links to move between groups within this page Parts Home - Top of page Front of car - Near Cowl - Center of Car - Rear Quarter - Rear of Car
Front of Car
1964 Impala Front Bumper, 3 pc This bumper will fit and install exactly as your original using existing or reproduction brackets. It includes pre-drilled mounting location holes for easy installation. These are new bumpers, not re-chromed!
1964 Impala License Panel, Front Brand spanking new. Beautiful finish just like the original.
1964 Impala Lower Grill Molding This is the long molding between the left and right eyebrow moldings, just beneath the grill and above the bumper.
1964 Impala Headlight Bezels, 2 pair Complete set of 4 1964 Impala headlight bezels.
1964 Impala Eyebrow Molding This is a new set of factory style eyebrow moldings that mount on the front fender and butt up to the hood molding.
1964 Impala Hood Lip Molding Brand spanking new!
1964 Impala Hood Spear New original equipment replacement GM licenced reproduction part.
Parts Home - Top of page Front of car - Near Cowl - Center of Car - Rear Quarter - Rear of Car
Near the Cowl section
1963 to 1964 Impala Wiper Arms (pair) Use on all body styles. Each Pair of wiper arms will fit and install exactly as your original using existing hardware for a superb OEM look.
1963 to 1964 Impala Windshield Molding, 2 lower pcs. Picture shows the 2 lower sections that fit along the bottom edge of windshield.
1963 to 1964 Impala 5 piece Windshield Molding Brand spanking new and nothing to polish.
Parts Home - Top of page Front of car - Near Cowl - Center of Car - Rear Quarter - Rear of Car
Center of Car
1962 to 1964 Impala drip rail molding Replace those worn out and dented 64 Impala drip rail moldings with shiny new ones.
1964 Impala 4 Door Molding, Upper/Front, 1pc Fits left or right side. 2 needed for each 64 Impala.
1964 Impala 4 Door Molding - Upper/Rear, 1pc Fits either left or right sides.
1964 Impala Door Molding, 2dr, Upper Use on 1747, 1847, 1767, and 1867 body styles. Only for 2 door non SS 64 Impala body styles. Driver or Passenger side, 2 req. per vehicle.
1962 to 1964 Impala Rocker Panel Molding with clips, Left Side Each molding will fit and install snuggly on your car and comes with installation hardware. This molding is made with great detail and precision and is high quality polished aluminum for a superb OEM look! This is new molding, not used!
1962 to 1964 Impala Rocker Panel Molding with clips, Right Side Each molding will fit and install snuggly on your car and comes with installation hardware. This molding is made with great detail and precision and is high quality polished aluminum for a superb OEM look! This is new molding, not used!
1962 to 1964 Bel Air/Biscayne/Impala Rocker Panel Molding Clips - 6pc 6 Pieces Make One Set; 2 Sets needed Per Car
Parts Home - Top of page Front of car - Near Cowl - Center of Car - Rear Quarter - Rear of Car
Rear Quarter section
1962 to 1964 Impala Rear Window Molding These moldings are frequently damaged during removal.
1964 Bel Air/Biscayne/Impala Quarter Panel Molding - Upper, 4dr, 1pc Fits either left or right sides.
1964 Impala Upper Quarter Panel Molding Use on 1747, 1847, 1767, and 1867 body styles. Only for 2 door non SS 64 Impala body styles. Driver or Passenger side, 2 req. per vehicle.
Parts Home - Top of page Front of car - Near Cowl - Center of Car - Rear Quarter - Rear of Car
Rear of Car
1964 Impala Trunk cove Molding (quarter extension molding) Left Side Originally used on 64 Impala body styles, 1739, 1839, 1747, 1847, 1767, 1867, 1769, and 1869. Not used on 64 Impala SS models.
1964 Impala Trunk cove Molding (quarter extension molding) Right Side Originally used on 64 Impala body styles, 1739, 1839, 1747, 1847, 1767, 1867, 1769, and 1869. Not used on 64 Impala SS models.
1964 Impala Trunk Cove Molding, Standard w/ clips, 64 This is the non SS trunk cove molding, not for use on Station wagons.
1964 Impala SS Upper trunk Molding (Bel Air & SS) Use on 64 Impala SS body styles. Only for 64 Impala SS 2 door body styles and Bel Air.
1964 Impala SS/Bel Air Rear Cove Molding, Inner Fits on the inside edges of the 1964 Impala trunk cove molding. One left and one right side.
1964 Impala SS/Bel Air Rear Cove Molding, Outer Fits on the outside edges of the 1964 Impala quarter panel sections of the trunk cove molding. One left and one right side.
1962 to 1964 Impala License Plate Panel Clips, 50 pieces These are the expansion clips used to hold the license plate panels in place.
1964 Impala rear license plate panel This is a BRAND NEW, high-quality aluminum rear license panel, manufactured to factory specifications, and easy to install.
1964 Impala Rear Bumper, 3pc This bumper will fit and install exactly as your original using existing or reproduction brackets. It includes pre-drilled mounting location holes for easy installation.
Use these links to move between groups within this page Parts Home - Top of page Front of car - Near Cowl - Center of Car - Rear Quarter - Rear of Car